PRODUCTION OF LIQUID

DETERGENT

Production of liquid detergent (soap)
involved a simple combination of
some chemicals (Ingredients) in the right
proportion to get a solution
(product) called liquid detergent (soap).
No special scientific knowledge is actually
required to engage in liquid
soap production. That is, any body from
any field can produce liquid
detergent (soap). No special machine is
also required to start up the
liquid detergent production for home use
or commercial purpose.
However, as time goes on and the scale of
production increases, the producer
might decide to acquire a special
packaging machine or think of getting
any
useful machine for production.

THE CHEMICALS (MATERIALS)
REQUIRED

1. Nitrosol/Antisol or C.M.S - 1/20 kg
2. Sulphonic acid - 1/2litre
3. Caustic soda - 1/10 kg
4. Soda ash - 1/10 kg
5. Texapon - 1/8 kg
6. Formaline -3-4 tsp (teaspoonful)
7. Perfume (Fragrance) - 1/16 litre or as desired
8. Colorant - 1/4 sachet
9. STTP. 2 tsp.
10. SLS. 2 tsp.
11. Water - 10 litres

THE APPARATUS (TOOLS) NEEDED
1. Containers
2. Hand gloves
3. Stirring rod (Turning Stick)

METHOD OF PREPARATION

1. Dissolve the caustic soda with 1/2 litre
of water and allow to stay for
30 minutes to 1hr. (Can be soaked for
24hours or over night for
effective result).
2. Dissolve the soda ash in 1/2 litre of
water and allow to stay for
30 min/hr (can also be soaked for 24
hours)
3. Get your sulphonic acid, pour inside
an empty bowl, and add your
perfume (fragrance) to it and the
texapoon, then add like 2 litres of
water and stir very well for about five
minutes.
4. Get the Nitrosol but if it is C.M.C
you’re using, make sure it is
dissolved two days to the preparation of
the soap with 3 liters of
water. If you are using Nitrosol, it can
be used instantly.
5. Dilute your SLS and STTP with little water in different containers.

PREPARATION
1. Get the Nitrosol that has been
dissolved in 3 liters of water or the
C.MC. that has been dissolved two days
to the preparation of the soap.
2. Add the dissolved sulphonic acid,
texapon and perfume to either the
Nitrosol or C.MC depending on the one
you are using and stir very well.
3. Add the already dissolved caustic
Soda and stir very well.
4. Add the already dissolved soda ash
and stir properly.
5. Add the disolved SLS and stir
6. Add the disolved STTP and stir also
7. Add formalin to the content and stir
properly